Glacier-Generated Floods and Debris Flows
Sudden release of glacially impounded water causes catastrophic floods, known as outburst floods, and ocasionally spawn debris flows that pose significant hazards in mountainous areas....
Temporal Development of Local Scour at Bridge Piers
The temporal development of local scour depth at circular cylindrical bridge piers is considered. New data are presented and used to quantify the influence of flow duration on the depth...
Overview of DoD Research in Groundwater Modeling
The U.S. Army Engineer Waterways Experiment Station leads a multi-agency research program for the Department of Defense (DoD) which continues the development of integrated, comprehensive...
Research to Application: Network Models to Simulate Flow and Transport in Heterogeneous Media
Effective groundwater cleanup requires accurate site-specific information on cleanup processes. Numerical simulations limit the need for expensive field experiments and provide details...
Computational Tools for Subsurface Conceptualization
Development of subsurface conceptual models for use in groundwater flow and transport modeling requires that existing data in the form of boring logs, cone penetrometer (CPT) logs, geophysical...
Modeling 3D Free Surface Flow in Compound Channels: A Validation Case Study
This paper presents the results of a validation study of a free-surface flow model. For the validation, experimental data collected in a compound open channel is used. This validation...
Groundwater Flow Component of a Wetland-Dynamics Model
A 3-D groundwater flow model was developed to study the hydrology of groundwater-fed wetlands. Initial model results, including steady and unsteady simulations, compare well with existing...
Distributions of Return Flow in Navigable Waterways
Physical impacts of barge traffic on the riverine environment have drawn increasing attention from resource managers of the Upper Mississippi River System (UMRS). Return flow, which can...
Two-Dimensional Modeling of River Dynamics for the Expansion of Clover Island, Kennewick, Washington
The Port of Kennewick, Washington, is proposing to redevelop Clover Island as a waterfront village concept. The island is located in the Columbia River between McNary and Priest Rapids...
Improving the Speed of Double Lockages
The size of tug and barge combinations on the Upper Mississippi River and Illinois Waterway frequently exceed the dimensions of the lock chambers they must pass through. The locks on these...
Development of a Hydrologic Model with Both Spatially Distributed and Physically Based Capabilities
A distributed hydrologic model is developed at The Pennsylvania State University for use with rasterized data bases. The purpose of the Terrestrial Hydrologic Model or THM is to investigate...
Field Verification of Dem-Derived Watershed Response
Rainfall-runoff data from an NAEW Experimental Watershed are used to test the feasibility of deriving the watershed response from the digital elevation model of the watershed. Using Clark's...
Mixing Processes in the Dangava River Estuary
The aim of this report is to present main changes in the hydrology of the Daugava River estuary after its natural water flow became regulated and to present a simple physical model of...
Marine Engines Emissions for Vessels of the United States Coast Guard
A source testing project was conducted for a select class of ships of the United States Coast Guard (USCG). Pollutants quantified included nitrogen oxides (NOX), sulfur dioxide (S02),...
SAMS: Software for Simulating Streamflow Series
This paper introduces SAMS, a computer software developed for the analysis, modeling, and generation of hydrologic time series such as annual and monthly streamfiows. It is written in...
Preliminary Validation of the MAC3D Numerical Flow Model
MAC3D is a recently developed numerical model for three-dimensional incompressible flow. Model predictions are compared with physical test data for a curved open channel and a multi-level...
3D Flow Structures?From Laboratory to Field Applications
One laboratory experiment and one field application have been modeled. For each one different sources of errors in the model results could be detected. It may be concluded that the applicability...
Verification of a 3D Flow Model Using Laboratory Data
The ASCE Task Sub-Committee on 3D Free Surface Flow Model Veri fications has been developing test cases and/or procedures for both computational model developers and users over the past...
Increasing Computational Accuracy of Radial Gate Flows
Radial (Tainter) gates are the most widely used flow control structure on large, open channel conveyance systems. In contrast, the hydraulic forces are complicated and this type of gate...
Developing a Rating Table for the Central Diversion Dam Radial Gates
The Central Nebraska Public Power and Irrigation District uses radial gates for flow control throughout its system. The rating tables for five radial gates on a diversion dam are in error,...
Return to search